Boom Mounted - Dual Arm Microscopes
Call our Sales Hotline at 1-877-215-3795
| Heavy double arm microscope stand for sturdy mounting of stereoscopic microscope head. |
Ability to capture digital images with included microscope camera. Connect via USB port.
Picture shows microscope camera. Actual shipped camera may look different. |
View specimens on your cctv monitor. Camera for video microscopy included.
Monitor not included. |
|
Nice images from included camera system on this microscope..
|
Circuit Board
Photo Thru 10x Eyepiece
3x Objective
30x Total Magnification
Excellent Quality! |
Beetle
Photo Thru 10x Eyepiece
10x Total Magnification
|
|
| Camera Equipment Included |
- Total Video - Photography Solution! Includes two cameras! Get a USB computer connected color digital microscope camera plus a CCD video camera for NTSC analog output to a TV. This is an incredible deal as these cameras are normally sold separately for hundreds of dollars. They are fully integrated into the microscope so you don’t need to waste time trying to figure out what accessories may be needed for video or photography.
- Includes the required photography accessories such as phototube and c-mount for attaching each different camera. The included expensive accessories are normally sold separately.
- Camera #1: USB Camera for Connection to Computer!
- Reduction Lens System built into the camera. This lens system is important to give a more realistic image that isn’t too magnified.
- Capture Live Full Motion Digital Video!
- Capture Stunning 640×480 and 320×240 Pixel Digital Still Images!
- Simple to Use. Plug Camera into Your Computer’s USB Port, Load the Software, and You’re Taking Images!
- Great for Viewing Specimens and Displaying on a Computer!
- Everything You Need: Microscope, Camera, Easy-to-Use Windows Capture and Editing Software, USB Cable. You Provide Only the Computer.
- Camera #2: Video Microscopy Solution! CCD Color Video Camera with NTSC (or PAL is desired) format analog output for connection to CCTV monitor or to normal Television!
- The CCTV Display Monitor is Not Included.
- Works on most Televisions and VCR’s for Viewing and Recording of Full Motion Video!
- CCD Camera Details: 1/3 Inch CCD Color Video Camera, NTSC Video Output Format, 420 Horizontal Lines Resolution, Low Light Requirement, with power supply and video cable with RCA jack (most TV’s and VCR’s have RCA inputs).
|
- Heavy Duty Dual Arm Boom Stand for Extra Rigidity than a Normal Stand.
- This Boom Stand has two horizontal bars with counterweight on the opposite end as the scope head.
- This is a superior design and significantly heavier and stronger than a normal boom.
- This Boom Stand provides Multi-Axis Rotation so the Scope’s Head can be rotated to most any angle or position.
- This boom gives great flexibility, allowing the head to be raised, lowered, pulled over the working area, or pushed out of the way when not used.
|
| Eyepieces and Magnification |
- Fixed Magnification: 5x, 10x, 15x, 30x! (5x/15x w/ Included Bottom Lens on, 10x/30x w/o Bottom Lens on).
- Eyepiece Set Included: 30mm Wide Field 10x.
- Bottom Lens Included: 0.5x. When present, this will approximately double the working distance as the scope head is elevated farther from the specimen when in focus.
|
- Includes Fluorescent Ring Light for Bright and Even Illumination.
- Spare ring fluorescent bulb is included.
|
| Head - Interpupillary Distance - Diopter |
- 45 Degree Inclined Trinocular Head, Rotatable 360 Degrees.
- Adjusts to the Distance Between your Eyes: 50 to 79mm InterPupillary Distance.
- Diopter Adjustment to Correct for Your Specific Vision Needs.
|
| Focusing and Working Distance |
- Focusing Knobs on Both Sides of Focusing Holder to Raise/Lower Head into Focus.
- Rack and Pinion Steel Gears to Raise/Lower Focusing Holder.
- Working Distance, 105mm - w/o Bottom Lens on, (225mm w/ Bottom Lens on), This is the distance under the scope head as it is in focus. This is a reasonably good distance to allow room for hands and tools under the scope.
|
- Heavy Base Plate is made of Solid Steel.
- Shipping Weight of Boom Stand (w/o any scope head) is 51 Lbs.
|
- Includes Rubber Eye Guards for Blocking Stray Light.
- Includes Dust Cover.
- Includes phototube with standard 23mm internal diameter for attaching standard microscope photography equipment.
- Includes 1x c-mount for attaching standard ccd video camera equipment.
|
- Well Made, Quality Construction.
- Manufacturer Certified to ISO: 9001 Standard.
- Always NEW! We don’t sell anything used.
- 110 VAC (220 VAC Available for Europe and Asia).
|
- This unit is protected by a 5 Year Warranty from Manufacturer on the Microscope and included equipment.
|
- Optional c-mount with reduction lens for mounting to the trinocular port and attaching the ccd camera. This only affects the ccd video camera and not other photography equipment. It will reduce the ccd camera magnified image through the microscope trinocular photography port.
|
| What are you waiting for? Buy Now! |
|
|
|
| |
| |
| Email sales@microscopesupply.com |
